———————————————————————
Maximus – 360 Xtractor Reader 2.6
———————————————————————

Whats New on 2.6

- ADDED: Support for Spear the New 360 Xtractor Add on.
- ADDED: Timer button, this allow you keep your hands free to handle
the spear while reading.
- CHANGED: Now just 1 button to search and scan sata ports for drives
that way is easier for noobs.
- FIXED: Compatible now with all Liteon Drives

*Note1: This version requires Winford Portio32 drivers, visit our xtractor page here

*Note2: If you plan to use the USB serial reader you need to install the USB drivers, you will find the drivers and install guides for it on our Xtractor support page here

PLEASE NOTE THE USB DOES NOT THE XTRACTOR, YOU NEED PLUG IT TO YOUR PC POWER SOURCE !!

*Note3: Take note Firmware Toolbox v4.8 will not open the resultant file (Benq, Samsung) after spoofing, only hitachi firmwares can be opened in Toolbox v4.8 for flashing, we are working on a new release to allow toolbox to open them without problems, meanwhile Samsung or Benq generated files can be flashed with mtkflash/dosflash as usual.

Click HERE to visit the downloads page

———————————————————————
Maximus – 360 Xtractor Reader 2.4
———————————————————————

Whats New on 2.4

- ADDED: To end once for all with the rumour of the application giving
bad keys when a pattern of bytes is present on the key
we have increased to 7 the validation checks on it. If you got
8320 at the end of your key is because that are part of the key,
and nothing wrong with it.

Also if you have a buffer overrun the application it will indicate it
so you can know something is wrong with your hardware (the max232
device u are using to read).

- ADDED: Support for some Intel chipsets not being detected properly
on scan ports routine. In the future if you cant see your
card at Valid Ports then give us an email and we will add your
card to definition lists (we are covering all on what we have
tested previous to the release).

- ADDED: The Base file on Spoof window will now remember last 4
entries to help you save even more time.

Click HERE to visit the downloads page

———————————————————————
Maximus – 360 Xtractor Reader v2.3
———————————————————————

Whats New on v2.3

- Whole Redesign, now it looks like the perfect companion for 360 Xtractor hardware.
- ADDED: Support for Native (no need for Legacy Mode anymore)
- ADDED: Direct Sata Port Detection (no need to mess with addressing)
- ADDED: Improved code for fast reading
- ADDED: Quick addons that simplify the process

*Note1: This version requires Winford Portio32 drivers, visit our xtractor page here

*Note2: If you plan to use the USB serial reader you need to install the USB drivers, you will find the drivers and install guides for it on our Xtractor support page here

PLEASE NOTE THE USB DOES NOT THE XTRACTOR, YOU NEED PLUG IT TO YOUR PC POWER SOURCE !!

*Note3: Take note Firmware Toolbox v4.8 will not open the resultant file (Benq, Samsung) after spoofing, only hitachi firmwares can be opened in Toolbox v4.8 for flashing, we are working on a new release to allow toolbox to open them without problems, meanwhile Samsung or Benq generated files can be flashed with mtkflash/dosflash as usual.

Click HERE to visit the downloads page

The new ALL-IN-ONE 360 Xtractor tool is here, It supports a POWER KIT + SERIAL RS232 & USB Tool in one, throw away anything else you have been using until now, as this device is all you need to update or reflash your 360 drives safely. After endless hours of design and testing we are proud to offer this high quality product made by Maximus.

Click Image To Order